Subminiature Signal Relay

Model:JRC-23F

◉ Small size light weight
◉ Fully sealed construction
◉ High sensitivity : 0.15W nominal power consumption
◉ RoHS Compliant

Send Inquiry PDF DownLoad

Product Description

Low coil power consumption.

High sensitivity.
Small size, light weight.
PC board mounting.
Suitable for automation facilities, telecommunication equipment, wireless radio remote control, sound control toys application etc.

Ordering Information

1 Part number:JRC-23F
2 Coil power:NIL:0.2W; H:0.15W
3 Enclosure: S: Wash tight; NIL: Flux proof
4 Coil rated voltage(V): DC:1.5,3,5,6,9,12,24

Contact Data

Contact Arrangement		1C(SPDT(B-M))
Contact Material		AgNi(Au plated)
Contact Rating (resistive)		0.5A/125VAC; 1A/30VDC; 0.3A/60VDC
Max. Switching Power		30W 62.5VA
Max. Switching Voltage		60VDC 125VAC	Max. Switching Current:1A
Contact Resistance		≤100mΩ	Item 4.12 of IEC 61810-7
Operational Life	Electrical	1X10⁵	Item 4.30 of IEC 61810-7
	Mechanical	1X10⁶	Item 4.31 of IEC 61810-7

CAUTION: The min. switching current and min. switching voltage is 50mA/6VDC.

Coil Parameter

Dash numbers	Coil voltage VDC		Coil resistance Ω±10%	Pick-up voltage VDC(max) (80%of rated voltage )	Drop-out voltage VDC(min) (10% of rated voltage)	Coil power W	Operate time ms	Release time ms
Dash numbers	Rated	Max.	Coil resistance Ω±10%	Pick-up voltage VDC(max) (80%of rated voltage )	Drop-out voltage VDC(min) (10% of rated voltage)	Coil power W	Operate time ms	Release time ms
001-150	1.5	3.0	15.0	1.2	0.15	0.15	≤5	≤5
003-150	3	6.0	60.0	2.4	0.30
005-150	5	10.0	166.7	4.0	0.50
006-150	6	12.0	240.0	4.8	0.60
009-150	9	18.0	540.0	7.2	0.90
012-150	12	24.0	960.0	9.6	1.20
024-150	24	48.0	3840.0	19.2	2.40
001-200	1.5	2.25	11.3	1.2	0.15	0.2	≤5	≤5
003-200	3	4.5	45.0	2.4	0.30
005-200	5	7.5	125.0	4.0	0.50
006-200	6	9.0	180.0	4.8	0.60
009-200	9	13.5	405.0	7.2	0.90
012-200	12	18.0	720.0	9.6	1.20
024-200	24	36.0	2880.0	19.2	2.40

CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.
2.Pickup and release voltage are for test purposes only and are not to be used as design criteria.
3.Unless otherwise stated, the rated coil voltage specified in coil parameter table shall be used for all tests and its application to the relay.

Characteristics

Insulation Resistance	1000MΩ min (at 500V)	Item 4.11 of I EC 60255-5
Dielectric Strength Between Contacts Between Contact and Coil	50Hz400V 50Hz 1000V	Item 4.7 of IEC 61810-7 Item 4.7 of IEC 61810-7
Shock Resistance	98m/s² 11ms	Item 4.26 of IEC 61810-7
Vibration Resistance	10Hz~55Hz Double amplitude 3.3mm	Item 4.28 of IEC 61810-7
Terminals Strength	5N	Item 4.24 of IEC 61810-7
Ambient Temperature	-30℃~70℃
Relative Humidity	5%to85%	Item 4.16 of IEC 61810-7
Mass	2-2g	Item 4.7 of IEC 61810-7