Miniature Power Latching Relay

Model:NT75L

◉ Low height
◉ 20A switching capability
◉ Product in accordance to EN60669-1 available
◉ Product in accordance to IEC60335-1 available
◉ RoHS Compliant

Send Inquiry PDF DownLoad

Product Description

Latching relay.
Small size, light weight and low coil power consumption.
Dielectric strength (between contact and coil): 5kV.
The parts are EN60669-1 standard compliance.
The parts with IEC 60335-1 standard is available.
Contact switching capacity is 20A.

PC board mounting.

Ordering Information

1 Part number:NT75L
2 Contact arrangement:A:1A; C:1C
3 Enclosure:S: Wash tight; Z: Flux proof
4 Coil:NIL:Single coil; D: Double coils
5 Polarity:Nil: Standard; R: Reverse polarity
6 Contact plating:NIL:Standard; G:Gold plated
7 Resist heat class:F:155℃
8 Coil rated voltage(V):DC:5,6,9,12,24

Contact Data

CAUTION:

1.It only applies to the room temperature.
2.For gold plated version, the min. Switching current and min. switching voltage is 50mA/6VDC; for non gold plated version (standard type),the min. switching current and min. switching voltage is 100mA/6VDC.

Coil Parameter

CAUTION:

1.When latching relays are installed in equipment, the latch and reset coil should not simultaneously. Coil should not be pulsed with less than the nominal coil voltage and pulse width should be a minimum of three times the specified operate time of the relay. If these conditions are not followed, it is possible for the relay to in be the magnetically neutral position .
2.Switching voltage is for test purpose only and are no to be used as design criteria.

Characteristics

Insulation Resistance	1000MΩ min (at 500VDC)	Item 4.11 of IEC61810-7
Dielectric Strength Between Contacts Between Contact and Coil	50Hz 1000V 50Hz 5000V	Item 4.9 of IEC 61810-7 Item 4.9 of IEC 61810-7
Creepage Distance	8.4mm
Shock Resistance	Functional: 98m/s² 11ms	Item 4.26 of IEC 61810-7
Shock Resistance	Destructive: 980m/s² 11ms	Item 4.26 of IEC 61810-7
Vibration Resistance	10Hz〜150Hz 10g/5g	Item 4.28 of IEC 61810-7
Terminals Strength	10N	Item 4.24 of IEC 61810-7
Ambient Temperature	-40℃〜85℃
Relative Humidity	5% to 85%	Item 4.16 of IEC 61810-7
Mass	13g	Item 4.7 of IEC 61810-7